Angular scale and travel
A ±60° scale and top plates approximately 34 cm in diameter. Lateral movement accommodates wheel displacement during steering.
WA-Plates alignment turn plates — pair
WA-Plates includes two wheel alignment turn plates. Each plate supports up to 2 tonnes, giving a 4-tonne capacity per pair. An approximate height of 5 cm supports integration into the alignment workstation, subject to its configuration and load limits.
Plates supplied2
Capacity per plate2 t
Capacity per pair4 t
Height≈ 5 cm
In the workshop
The plates allow the wheels to rotate during alignment. Angular markings up to 60° in each direction and approximately 2.5 cm of lateral travel from centre accommodate movement. Check the load applied to each plate: the pair rating does not increase the individual limit.
A two-plate set
The specification includes two thrust blocks and two transition bridges. Check how these elements fit your workstation before use.
Technical specifications
| Plates supplied | 2 |
|---|---|
| Capacity per plate | 2 t |
| Capacity per pair | 4 t |
| Height | ≈ 5 cm |
| Top plate diameter | ≈ 34 cm |
| Angular scale | ± 60° |
| Lateral travel from centre | ≈ 2.5 cm |
| Included accessories | 2 thrust blocks and 2 transition bridges |
Frequently asked questions
Is the 4-tonne rating per plate?
No. The stated limit is 2 tonnes per plate and 4 tonnes per pair. The individual load limit must always be observed.
Which accessories are supplied?
The supplied specification lists two thrust blocks and two transition bridges, in addition to the two turn plates.
Reference: WA-PlatesView full specifications →